Call Us

Lifting System Vacuum Homogenizer Cosmetic Emulsifying Equipment
You are here: Home » Products » Vacuum Emulsifier » Lifting System Vacuum Homogenizer Cosmetic Emulsifying Equipment


Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Lifting System Vacuum Homogenizer Cosmetic Emulsifying Equipment


Product Description
1.The homogenizing structure made through German technology adopts the inported double-end mechanical seal effect.The maximum emulsifying tatation speed can reach 4,200rpm and the highest shearing fineness can reach 0.2-5um.
2.The pot body is welded by imported three-layer stainless steel plate.The tank body and the pipes adopt mirror polishing,which fully confirms to GMP requirements.
3.According to technological requirements,the tank body can heat or cool the materials.The heating modes mainly include steam heating or electric heating.
The machine is mainly applied in such industries as daily chemical care products,food industry,paint and ink,nanometer materials,cosmetic cream,etc.The emulsifying effect is more prominent for materials of high base viscosity and high solid content.


*Before starting the vacuum pump, you must ensure there is enough water in the circulating water tank, otherwise the pump would be in damage.

* If there is no water sucked into while the vacuum pump starts to work, a sharp noise would occur, in this occasion, please stop the vacuum pump quickly and check if there is water sucked into the pump.

* When the vacuum pump is working, it is the best to stop heating (except that heating is within process demands).Because during heating, water will volatilize and positive pressure will be produced, making effect on the vacuum degree at the maximum amount of 0.5Mpa;


Video outgoing-inspection:
Core Components: Motor, PLC:
  • SPX-17

  • SPX

Product Description
Mixing system
the mixing system consists of  inter fix paddle,scrapper mixer and clockwise direction blender,which the retation  speed can  reach 63 times per minute.and the perfect mixing result increase the mixing efficiency and performance,as well as heating efficiency.

Water Tank And Oil Tank

The water tank and fuel tank are pretreated by electric heating and stirring. On the one hand, it is to microprocess the material which is difficult to dissolve. The other is to reduce damage to the main pot.

Operating Platform

Use safe,non-slip oilproot and waterproot operating platform to protect the safety of workers. To ensure that workers have access to the tank for easy handling and dumping of materials.

Heating and cooling system

Generally there are two ways of heating electric heating and steam heating for your option

Preparation before using electric heating

*Ensure the jacket of tank has enough water or conductive oil

*Setting temperature ,Set the temperature you request to heat

*Ensure the exhaust of the jacket is opened

* After filling water or conductive oil in the jacket Check if the connection of heating tube has leakage

Warning :

* Please note, heating tube will be burnt out when user turn on the heating tube heating while there is not water or conductive in the jacket.

When heating tube is burnt out, it turns black, need to change the heating tube in case effect production .

* When changing the heating tubeplease make sure the wires compacted ,the wires should not be bifurcated ,otherwise the end of wire will be possibly burnt through due to electric short circuit, if there is conductive oil in the jacket even will makes an ignition or leakage





Vacuum Emulsifier
Capping Machine

 Skype: vivian8spx
Copyright 2022 Guangzhou Sipuxin Light Industry Machinery Co.,Ltd.   Sitemap   Support By Leadong