About the vaccum emulsifiser structure and Lid technic introduces
Three layer, double hydraulic lifting cylinder, heating system with external insulating layer, can vacuumize, anchor wall agitator with scrapers and Teflon blade mixing, overload and overheat protection; upper dished head, sealed with main pot cover protected by four vacuum-locks, tilting pot, be able to bottom discharge under positive pressure, cone bottom
Internal tank
SUS316L, thickness 4mm,
cone bottom, welds with top dished head by flange.
Middle jacket tank
SUS304, thickness 4 mm,
Working pressure inside jacket 0.25Mpa
Can be cooled by cooling /chilling water
Insulation media: aluminum silicate
Insulation media: aluminum silicate
SUS304, thickness 3 mm,
polished after grinding welds flush
SUS316L, top dished head, thickness 8mm
Mounted on the lid: a vacuum pressure sensor, air release valve, vacuumize valve, a archon light, spices bucket (addition ports), a material suction device with filter connected by manual butterfly valve, an air breather, 4 vacuum locks, and a bidirectional spray ball, and a manhole sealed sanitation cover mounted a sight glass with steam scraper.
Product application
Project case
English
